GIZZMOTO

meeting global challenges

Compressed Air Power FOR WATER & Liquids'

no moving parts PUMPS

An Alternative Technology Process For Transferring Liquids & Flow-able Materials By Compressed Air or Gas

Processing Water & Liquids

Processing Different Liquids & Chemicals

Processing Gases

Culmination of 5 year Physics & Engineering Research & Development programmes at Lancaster University

It is estimated that pumps account for 7 percent of the total maintenance cost of a plant or refinery, and pump failures are responsible for 0.2 percent of lost production. GIZZMOTO offers an alternative technology solution to overcome many problems associated with standard, mechanical pumps, including…….

GIZZMOTO offers

An Alternative Technology Process For Transferring Liquids & Flow-able Materials By Compressed Air or Gas

GIZZMOTO - TCL Cumbria R & D Film

Multi-Nozzle Annular Jet (MNAJ)
Pumps & Equipment

An Alternative Technology Process For Transferring Liquids &
Flow-able Materials By Compressed Air or Gas

Eco-Friendly – Plus, it could be used in virtually ANY environment – in Hostile & Hazardous Areas – on Land & Sea

Multi-Nozzle Annular Jet (MNAJ) Pumps & Equipment

Powered by Compressed Air, a global, universal, low energy supply

 PRODUCT RANGE SUMMARY

 Multi-Nozzle Annular Jet (MNAJ) – Pumps & Equipment

NOTE: Use the Contact Form to request PDF data sheets & prices

Selection of inlet & outlet connections complemented by choice of compressed air (or gas) power supply connections *

* Side Port

* Top Port

* Rear Port

GIZZMOTO

The journey of collaboration between

Lancaster Product Development Unit

Fluid Dynamics Study of a Vortex Generating Device

Use of Computational Fluid Dynamics, Computer Aided Design and Selective Laser Sintering for Prototyping

The project confirmed the principle concept does NOT have any moving parts and identified a phenomena that can be applied in four different ways:

DRIVING - as in transferring liquids
TYPICAL APPLICATIONS –
SUBMERSIBLE & BOREHOLE PUMPING

MIXING - liquids, gases & materials
TYPICAL APPLICATIONS –
AGITATION/AERATION

PROPULSION - jetting
TYPICAL APPLICATIONS –
TANK STIRRING/CLEANING

SPINNING - the rotational effect
TYPICAL APPLICATIONS –
SEPARATION & SCOURING

INSTITUTE OF PHYSICS HE STEM PROGRAMME INDUSTRIAL GROUP PROJECTS
Department of Physics, Lancaster University

A scaled up, 50mm device with parts manufactured using conventional methods, was designed and produced as a pair for testing – see video →

Research & Development of Gas & Liquids Powered Materials Processing Phenomena
3 Year + Industry-led funded PhD

PRACTICAL TEST FACILITIES

Bulk water containers and open tank, control & measurement console, recording equipment, all-pneumatic power & control supply, including air compressor & air receiver, interconnecting pipework, mechanical positioning gear

Centre for Global Eco-Innovation supports region’s green economy

Driving forward Eco-innovation in the region by helping small and medium sized companies access nearly a million pounds worth of funding and linking them with the best university talent.

GLT FLUID DYNAMICS CONCEPT
Market Research Project

A Market Research Project resulted in a 63-pages Report. It identified key market sectors & opportunities & 100’s applications – TOP 20

01 – SUBMERSIBLE PUMPS
02 – SLURRY PUMPS
03 – BOREHOLE
04 – PNEUMATIC CONVEYING
05 – TRANSFER PUMPING
06 – PROPELLERS
07 – DRAINING PUMPS
08 – VACUUMING
09 – MECHANICAL GRINDER
10 – MIXERS

11 – SEPARATING IMPURITIES
12 – DISPENSING SOLUTIONS
13 – COOLING
14 – WATER PRESSURISING
15 – MIXTURES PRESSURISING
16 – ROPE & CABLE CLEANING & COATING
17 – INSERTING CHEMICALS OR GASES
18 – FROTH FLOTATION CELLS
19 – DE-IONISING WATER
20 – INJECTORS

It covered Agriculture, Building & Construction, Fish Farms, Food & Drinks Industries, Extraction of Crude Petroleum & Gas, Mining, Water & Waste Management , Pharmaceutical, Process, Chemical, Marine, Environmental & Others.

* Potential Benefit - water saving applications in all sectors

It identified key market sectors & opportunities with examples of use of the concept to meet two global challenges

1 – Supplying Water  – Borehole Pumping

2 – Saving Water – Jet Washer Cleaning

Market Research Project

China has a water supply shortfall of 40 billion cubic metres – about six times the amount used in Southern California.

China supports 20% of the world population with only 7% of its water.

Shortages are particularly acute in Northern China where 50% of the country’s population lives with only 15% pf China’s water.

Other parts of the world are also affected

IMPROVING THE ENVIRONMENT

SAVING WATER

REDUCING CARBON FOOTPRINT

 TCL Cumbria CGE HD Film

PLUS Fixing points for Mounting Brackets on top & rear faces

NEW PUMPS

MODEL SIZE 15

Bore ID – 15mm Inlet & Outlet – 1/2″ BSP NB Other Connections * Air Supply – 1/2″ BSP NB Side or Rear Ported Body Diameter – 63mm Spigot Diameter – 40mm Length/Height – 100mm Base Stand – +35mm PRICE: £123.00 Introductory Offer Price £74.00

MODEL SIZE 20

Bore ID – 20mm
Inlet & Outlet – 3/4″ BSP
NB Other Connections *
Air Supply – 1/2″ BSP
NB Side or Rear Ported
Body Diameter – 80mm
Spigot Diameter – 40mm
Length/Height – 110mm
Base Stand – +35mm

PRICE: £177.00
Introductory Offer Price
£106.00

SPECIAL TRANSFER PUMP & AGITATOR UNITS

FITTED WITH SEDIMENT DISPERSER-FLUIDISER ATTACHMENT

Fig.1
Fig.2
Fig.3
Fig.4

Units fitted with Intermediate Section and Special Stand Assembly with additional Side Port Air Supply Connection

Fig. 1

SIZE 25 PUMP

Fig. 2

SIZE 25 AGITATOR

Fig. 3

SIZE 50 PUMP

Fig. 4

SIZE 50 AGITATOR

Length/Height – 200mm
Base Stand –         +35mm

Length/Height – 300mm
Base Stand –         +80mm

WATER-LIQUID PUMPS

MAIN BODY INFLATABLE – SEAL or FLOAT RING

MODEL SIZES 25 – 50

Bore ID – 25 – 50mm
Inlet & Outlet – 1″BSP – 2” BSP
Air Supply – 1/2″BSP – 3/4″ BSP
NB Top & Rear Ported
Body Diameter – 100 – 200mm
Spigot Diameter – 50 – 100mm
Length/Height – 160 – 250mm

PRINCIPLES OF APPLICATION

  1. Seal Unit inserted into tube bore and inflated to hold in position
  2. Float Ring Unit with flexible tube and inflated for buoyancy

NOTE: Click on the ‘GET IN TOUCH’ button to request Full Product Range Catalogue in PDF format

PRODUCT RANGE SYSTEMS - in design stage

ALL-PNEUMATIC ENERGY SAVERS

50%
Compressed
Air Usage
0%

System 1
PULSER PUMP SYSTEM

50%
Compressed Air
Usage
Double Output
0%

System 2
PULSER PUMP+ SYSTEM

25%
Compressed Air
Usage
Quadruple Output
0%

System 3
DUAL PUMPS SYSTEM

25%
Compressed Air
Usage
Double Output
0%

System 4
SYPHON PUMPING

PRODUCT RANGE UNITS – design concept

PRODUCT RANGE UNITS – conceptual

Size 25 & Size 50 – 1”, 2”, 3”, 4”, 5”, 6”

SPINNERS & CENTRIFUGES

Size 25 & Size 50 – 1”, 2”, 3”, 4”, 5”, 6”

Internal Pipe/Tube Scourer & External Pipe or Cable Cleaners

CENTRIFUGES & SCOURERS

Based on application of secondary phenomena

Spinning water speed controlled throughout tube

Conceptual schematic of centrifuge machine

Spherical object drawn into bore then spun in suspension

SAMPLE OF TYPICAL MARKET SECTOR

 Wastewater & Algae Treatment

Lagoons

 (or aerated pond) are a simple wastewater treatment system consisting of a pond with artificial aeration to promote the biological oxidation of wastewaters.

Aerobic Lagoon 

Lagoons designed to be completely aerobic, stabilizing organic matter at a higher rate than the other lagoons. The mechanism for providing oxygen can vary greatly.

Partial-mix Aerated Lagoon 

Supplied with oxygen by floating surface aerators or submerged diffusers. The introduction of aeration devices increases the operation and maintenance costs.

Completely Mixed Aerated Lagoons

These are used throughout the developed world and can produce excellent effluent quality. They are designed to exclude algae by mixing the solids.

PRODUCT RANGE SYSTEMS – conceptual

WATER TREATMENT PONTOON

Fitted with Size 50 GIZZMOTO attached to vertical reciprocator

2 x Size 25 GIZZMOTO

for motive power

Plus SURFACE WATER SPRAYING

Plus SURFACE WATER SPRAYING

SURFACE WATER SKIMMER

Fitted with Size 50 GIZZMOTO
mounted vertical on to floating deck
with collecting funnel and trough with
coalescing filtration.

Multiple stages

An Alternative Technology Process For Transferring Liquids & Flow-able Materials By Compressed Air or Gas

* A Self-Contained Power & Control System

  can be constructed, where Compressed Air –

  a global & universal energy supply  –

  is used for powering devices and for supply

  to Pneumatic Controls – Local or Remote –

  Stop/Start, Semi-Automatic, Sequential, Fully

  Automatic, Timing, Counting, etc.

Power & Control System Example

REVERSING or ‘BACK-FLUSHING’ operations –                to remove blockages – plus,

   CLOCKWISE or ANTI-CLOCKWISE Rotations

that can be selected for AGITATION applications,

with the added feature of delivering AERATION

Power & Control System Example

Remote Liquid Level Control & Annunciator (Visual & Audio)  operating submersible GIZZMOTO on level (flood) control

PHYSICS LABORATORY MOCK-UP

Future Designs to incorporate additional features

FLOW METERS, PRESSURE SENSORS

by connecting to suitable power sources to

MEASURE, RECORD & DISPLAY

or for secondary processes

HEATING or CHILLING

PROCESSES SOLUTIONS

PRODUCTS

designed to suit and with a range of attachments

SYSTEMS

tailored, configured and packaged for each application

SERVICES

complete programme, from build to installation, to hire

EXAMPLES OF MINI &

  MIDI PORTABLE PACKS

  & FREE-STANDING

  SOLUTIONS PACKAGES

  FOR ON-SITE APPLICATION

tcl-cumbria, in conjunction with the CGE Lancaster University Engineering Department have jointly amassed prolific knowledge on the phenomena produced by GIZZMOTO as a no-moving-parts, fluid dynamics concept for use with Water and powered by Compressed Air and can demonstrate its functioning capability with that media.

Both Size 25 and Size 50 Pumps have been tested under laboratory conditions.

All other units are subject to trials.

The GIZZMOTO concept is one that offers an alternative technology solution for many industrial processes. Such is the potential multiplicity of uses (as identified in a 63-page Market Research Project from Lancaster University’s Lancaster Environmental Centre), purchasers of new units can only be offered a considered opinion on how the concept might work in a specific application. It will be expected that in-depth knowledge on the environment and media to be processed is in the domain of the end user.

tcl-cumbria will confidentially deal with all enquiries

Gases & Liquids Technology

  Revolutionary concept provides

 alternative technology solutions

 with NO-MOVING parts devices

DRIVING, MIXING, SPINNING & REACTING

 Liquids & Flowable Media with

GIZZMOTO